The Influence of Critical Thinking, Collaborative Skills on Learning Outcomes of Sensor and Actuator Competency of Electrical Engineering Collegers in Indonesia

Authors

  • Farid Baskoro Department of Electrical Engineering, State University of Surabaya
  • Tri Wrahatnolo Faculty of Vocational Studies, State University of Surabaya
  • Lilik Anifah Department of Electrical Engineering, State University of Surabaya
  • Achmad Imam Agung Department of Electrical Engineering, State University of Surabaya

DOI:

https://doi.org/10.16920/jeet/2026/v40i1/26135

Keywords:

Affective, Cognitive, Collaborative, Critical Thinking, Learning Outcomes, Psychomotor.

Abstract

Critical thinking is a competency essential for collegians in both personal and professional contexts. For this reason, universities should integrate it effectively into their curricula, programs, and courses. Collaboration is a key factor in advancing both educational theory and technology. This study examines how critical thinking and collaboration skills influence the learning outcomes of electrical engineering collegers in Indonesia when applied through Problem-Based Learning (PBL) and Project-Based Learning (PjBL). The research involved colleagues from five universities in Surabaya, with a specific focus on competencies related to sensors and actuators. Data were collected through questionnaires and written tests, then analyzed using SEM-PLS, employing path analysis and bootstrap methods to assess direct and indirect effects. The results indicate that critical thinking, mediated through collaboration, can improve collegers’ abilities by 26.3% in the cognitive domain and 16.4% in the affective domain. Furthermore, critical thinking directly impacts cognitive and psychomotor learning outcomes, while indirectly influencing psychomotor outcomes through collaboration. These findings highlight the importance of fostering critical thinking and collaborative skills to enhance learning outcomes in engineering education.

Downloads

Download data is not yet available.

References

Andrini, V. (2016). The effectiveness of ınquiry learning method to enhance collegers ’ learning outcome: A theoritical and empirical review. Journal of Education and Practice, 7(3), 38-42.

Baskoro, F., B, I. G. P. A., Rohman, M., F, D. A. S., & Nurdiansyah, A. P. (2025). Impact of Sample Size Variation on Moving Average Filter Performance for Stability and Accuracy in Ultrasonic Sensor Measurements. TEM Journal, 14(2), 1681–1688. https://doi.org/10.18421/TEM142-65

Baskoro, F., Rohman, M., Arya, D., & Putra, A. (2025). Optimizing Stability of Ultrasonic Sensor Readings: Study on Moving Average Filter Parameter Selection. JOURNAL ZETROEM, 7(1), 59–65. https://doi.org/10.36526/ztr.v7i1.3603

Chin, W., & Marcoulides, G. (1998). The Partial Least Squares Approach to Structural Equation Modeling. Advances in Hospitality and Leisure.

Elstermann, M., Betz, S., Lederer, M., Schmidt, W., & & Bührer, L. (2021). Subject-Oriented Reference Model for Virtual Factory Operations Commissioning. Lecture Notes in Business Information Processing.

Facione, P. (2015). Critical Thinking.whatit is and why it count.

Farid, B., Bambang, S., Lilik, A., & Yuyun, A. (2023). The Magic of Communication and Collaboration: Enhancing Sensor and Actuator Competence for Successful Learning. Journal of Law and Sustainable Development.

Farid, B., Bambang, S., Lilik, A., & Yuyun, I. (2023). Beyond Smart Devices: Fostering Critical, Communication and Collaborative Thinking in IoT-Based Sensor and Actuator Competence Learning Outcomes. TEM Journal, 2396 – 2407.

Gube, M., & Lajoie, S. (2020). Adaptive expertise and creative thinking: A synthetic review and implications for practice. Thinking Skills and Creativity.

Hair, J., Risher, J., & Sarstedt, M. R. (2019). When touse and how to report the result of PLS-SEM. EurBus, 2-24.

Hinyard, L., Eliot, K., Toomey, E., & Breitbach, a. A. (2018). Student Perceptions of Collaboration Skills in an Interprofessional Context: Development and Initial Validation of the Self-Assessed Collaboration Skills Instrument. valuation & the Health Professions, 1-23.

Huang, N. t., Chang, Y. s., & & Chou, C. h. (2020). Effects of creative thinking, psychomotor skills, and creative self-efficacy on engineering design creativity. Thinking Skills and Creativity.

Jia, X., Li, W., & Cao, L. (2019). The role of metacognitive components in creative thinking. Frontiers in Psychology, 10(2040), 1-11.

Johnson, B., & Christensen, L. (2017). Educational Research: Quantitative, Qualitative, and Mixed Approaches. SAGE Publication.

Kabeel, R., & Eisa, S. (2016). The correlation of critical thinking disposition and approaches to learning among baccalaureate nursing student. Journal of Education and Practice , 7(32), 91-103.

Mursid, R., Saragih, A., & Hartono, R. (n.d.). The Effect of the Blended Project-based Learning Model and Creative Thinking Ability on Engineering Collegers ' Learning Outcomes. International Journal of Education in Mathematics, Science, and Technology, 10(1), 218-235.

Rao, N. J. (2020). Outcome-based Education: An Outline. Higher Education for the Future.

Redifer, J., Bae, C., & Zhao, Q. (2021). Self-efficacy and performance feedback: Impacts on cognitive load during creative thinking. Learning and Instruction, 71.

Sandhya, D., Ramananda, H., Jagadeesha, B., Rajesh, K., & Reni, C. (2021). Effectiveness of Collaborative Learning Among Gen Z Engineering Collegers . Journal of Engineering Education Transformations.

Segundo Marcos, R. I., López Ferández, V., Daza González, M. T., & & Phillips-Silver, J. (2020). Promoting children’s creative thinking through reading and writing in a cooperative learning classroom. Thinking Skills and Creativity.

Subuh, H., Ekohariadi, Munoto, Lilik, A., & Fendi, A. (2022). Project-based Learning in The Relationship of Motivation and Critical Thinking to The Competenceof Electrical Engineering Collegers . Journal of Engineering Education Transformations.

Sumarni, W., & Kadarwati, S. (2020). Ethno-stem project-based learning: Its impact to critical and creative thinking skills. Jurnal Pendidikan IPA Indonesia.

Syahrin, A., Dawud, Suwignyo, H., & Priyatni, E. (2019). Creative thinking patterns in student‘s scientific works. Eurasian Journal of Educational Research 81, 21-36 .

Taghva, F., Rezael, N., Ghaderi, J., & Taghva, R. (2014). Studying the relationship between critical thinking skills and collegers ’ educational achievement. International Letters of Social and Humanistic Sciences, 18-25.

Ulger, K. (2018). The effect of problem-based learning on the creative thinking and critical thinking disposition of collegers in visual arts education. Interdisciplinary Journal of Problem-Based Learning.

Yang, Y., Song, Y., Bo, X., Min, J., Pak, O. S., Zhu, L., . . . & Gao, W. (2020). A laser-engraved wearable sensor for sensitive detection of uric acid and tyrosine in sweat. Nature Biotechnology.

Downloads

Published

2026-07-31

How to Cite

Baskoro, F., Wrahatnolo, T., Anifah, L., & Agung, A. I. (2026). The Influence of Critical Thinking, Collaborative Skills on Learning Outcomes of Sensor and Actuator Competency of Electrical Engineering Collegers in Indonesia. Journal of Engineering Education Transformations, 40(1), 80–88. https://doi.org/10.16920/jeet/2026/v40i1/26135

Issue

Section

Articles