Development of Numerical Protection Laboratory through Industry Institute Interaction

Authors

  • Rashesh P. Mehta Electrical Engineering, Department, Birla Vishvakarma Mahavidyalaya., Vallabh Vidyanagar, Gujarat
  • Sushil Joshi Distribution Automation, ABB India Ltd., Vadodara, Gujarat
  • Pankaj Savani Electrical Engineering, Department, Birla Vishvakarma Mahavidyalaya., Vallabh Vidyanagar, Gujarat
  • Aditya Danayak Electrical Engineering, Department, Birla Vishvakarma Mahavidyalaya., Vallabh Vidyanagar, Gujarat
  • Mitul Munjani Electrical Engineering, Department, Birla Vishvakarma Mahavidyalaya., Vallabh Vidyanagar, Gujarat

Keywords:

Industry Institute Interaction, Power system protection, laboratory development, Test setup, Over-current protection.

Abstract

T he d evelo pm en t o f a nu merical protection laboratory is implemented through industry-institute interaction under an MOU. This paper documents the contribution of the major project of final year students on using a digital over-current and earth-fault relay. The latest numerical protection relay has been provided as a replacement for an older version by ABB India Ltd. as a part of corporate social responsibility (CSR). The laboratory experimental panel has been developed through the major project of the final year student group. There was the active participation of ABB India Ltd. by way of providing dedicated training to the student group and faculty members involved in the installation, commissioning, and design of the experimental panel. The results obtained from various case studies are reported in this paper. The facilities created are used for regular laboratory practicals for undergraduate and post-graduate students. The laboratory manuals are prepared to facilitate the implementation of the experiments. The laboratory curriculum has been updated for the UG course "Power System Protection" and the PG course "Advanced Power System Protection and Switchgear". It has resulted in improvement in the placement of UG and PG students. The training of industry and state power utility engineers can also be performed on the experimental panel developed. The outcome of this academic innovation related to industry-institute interaction is that the industry readiness of students has increased.

Downloads

Download data is not yet available.

Downloads

Published

2022-10-01

How to Cite

P. Mehta, R., Joshi, S., Savani, P., Danayak, A., & Munjani, M. (2022). Development of Numerical Protection Laboratory through Industry Institute Interaction. Journal of Engineering Education Transformations, 101–108. Retrieved from https://journaleet.in/index.php/jeet/article/view/230

Issue

Volume 36, Issue 2, October 2022

Section

Articles

References

ABB. (2019a). Feeder protection and control Ref615 IEC. Medium Voltage Products. https://new.abb.com/medium-voltage/digital-substations/protection-relays/feeder-protection-and-control/feeder-protection-and-control-ref615-iec

ABB.(2020b).Products and services.Abb.com/indian-subcontinent.https:/ /new.abb.com/indian-subcontinent/products-and-services

AICTE.(2020).AICTE initiatives&schemes—Flipbook.AICTE.https://fliphtml5.com/jfjx/dxvw

Ananthanarayanan, P., Chellamuthu, M., & Gnanappa, B. (2014). Institute-industry collaboration in higher engineering educational institutions. 2014 International Conference on Interactive Collaborative Learning (ICL),197–202.https://doi.org/10.1109/ICL.2014.7017770

Anilkumar, N., Jyoti, B., Kuashik, M., & Shirol, S. (2015). Industry-Institute Interaction: An Important Step towards Empowering Skills of Engineering Students. Journal of Engineering Educatio n Transformations,29(1),103.https://doi.org/10.16920/jeet/2015/v29i1/7714 3

Bakhru, S. A., & Mehta, R. P. (2020). Assignment and Project Activity Based Learning Systems as an Alternative to Continuous Internal Assessment. Procedia Computer Science,172, 397–405.https://doi.org/10.1016/j.procs.2020.05.073

BVM. (2021). Joint III and Project Activities under TEQIP-II and TEQIP-III at BVM Engineering College.https://www.bvmengineering.ac.in/III%20Cell/ Activities/2.3%20III%20ACTIVITIES%20FI NAL.pdf

Chavan, A., & Bhujanga Rao, S. (2015). Defining Paradigms for Effective Industry Institute Collaboration.Journal of Engineering Education Transformations, 28(4), 102.https://doi.org/10.16920/jeet/2015/v28i4/7041 0

Electrical Engineering Department. (2021).MOU List with different Industries.https://www.bvmengineering.ac.in/dashboard.a spx?branch_id=5

Electrical Engineering Department. (2022). Activities done under Industry Institute Interaction.https://www.bvmengineering.ac.in/department _events.aspx?branch_id=5

Fernao Pires, V., Sousa Martins, L., Amaral, T. G., Marcal, R., Rodrigues, R., & Crisostomo, M. M. (2008). Distance-Learning Power-System Protection Based on Testing Protective Relays. IEEE Transactions on Industrial Electronics, 55(6),2433–2438.https://doi.org/10.1109/TIE.2008.920647

IUCEE ITF Team. (2017). Employability of Engineering Graduates in India A View from IUCEEITF Community.IUCEE.http://iucee.org/iucee/wp-content/uploads/2017/10/ITF_Employability-White-Paper-Ver3.1.pdf

Liang-ping, W., & Shan-lin, Y. (2010). Study on the Dynamic Mechanism of the Universities’ Independent Innovation Based on Industry-University-Research Institute Alliance. 2010 International Conference on E-Business and E-Government,4628–4631.https://doi.org/10.1109/ICEE.2010.1161

Mehta, R., & Oza, B. (2010). Laboratory Simulation of Transient Overreach for Transmission Line Protection. IAECT 2010. International Conference on Advances in Energy Conversion Technologies, Manipal University, Manipal.

Mehta, R., Oza, B., Nair, N. K. C., & Kumar, M. (2012). Simulation of numerical distance protection through senior design project. 2012 IEEE International Conference on Power System Technology (POWERCON), 1–6. https://doi.org/10.1109/PowerCon.2012.64014 68

Mehta, R. P., & Oza, B. A. (2008, December). Laboratory Simulation of Generator Protection. NP SC2008.National Power Systems Conference,IITBombay.https://www.ee.iitb.ac.in/~npsc2008/NPSC_C D/Data/Poster/p251.pdf

Mehta, R. P., Patel, C., & Chauhan, S. (2020). Laboratory Simulation of Numerical Over-Current Protection. Journal of The Institution of Engineers (India): Series B, 101(3), 255–260. https://doi.org/10.1007/s40031-020-0045s2-x

Oza , B. A., & Bra h ma , S. M . (2 0 0 5 ). Development of Power System Protection Laboratory Through Senior Design Projects. IEEE Transactions on Power Systems, 20(2),532–537.https://doi.org/10.1109/TPWRS.2005.846200

Oza, B. A., Nair, N. K. C., Mehta, R. P., & Makwana, V. (2011). Power system protection and switchgear. New Delhi. Tata McGraw-Hill Education Private Ltd.

Patel, I., & Shah, J. (2020). Initiatives & Strategies for Enhancing Industry Institute Interaction (III): Practices at Birla Vishwakarma Mahavidyalaya (BVM), Vallabh Vidhyanagar, Gujarat, India. Procedia Computer Science, 172,172–175.https://doi.org/10.1016/j.procs.2020.05.026

Revana, G., Ramakrishna, K., & Madhav, G. V. (2014). Increasing importance of industry-institute interaction in engineering education in India. 2014 International Conference on Interactive Collaborative Learning (ICL),779–784.https://doi.org/10.1109/ICL.2014.7017871

Roessner, J. D., Bean, A. S., & Kenan, W. R. (1990). Industry interactions with federal laboratories. The Journal of Technology Transfer,15(4),5–14.https://doi.org/10.1007/BF02371518

Shahnia, F., Moghbel, M., & Yengejeh, H. H. (2016). Motivating Power System Protection Course Students by Practical and Computer-Based Activities. IEEE Transactions on Education,59(2),81–90.https://doi.org/10.1109/TE.2015.2448611

Wei-Jen Lee, Jyh-Cherng Gu, Ren-Jun Li, & Didsayabutra, P. (2002). A physical laboratory for protective relay education.IEEE Transactions on Education, 45(2), 182–186. https://doi.org/10.1109/TE.2002.1013885