Opening Students' Creativity and Innovation through CAD Learning in Collaboration with Small and Medium-Sized Enterprises

Authors

  • Bayu Rahmat Setiadi Department of Mechanical Engineering Education, Universitas Negeri Yogyakarta Yogyakarta
  • Sugiyono Department of Mechanical Engineering Education, Universitas Negeri Yogyakarta Yogyakarta
  • Thomas Sukardi Department of Mechanical Engineering Education, Universitas Negeri Yogyakarta Yogyakarta

DOI:

https://doi.org/10.16920/jeet/2022/v36i1/22144

Keywords:

Creativity, Innovation, Small and Medium-Sized Enterprises, CAD Learning, Design Product.

Abstract

Currently, student product design work is based on product design examples that the lecturer has determined. This can provide the scope of creativity and innovation of student product designs to be limited to old textbook-based designs and not real problems in the world of work. The research method uses an experiment with a One-Group Double Posttest-Only Design. Respondents are students who take CAD courses. The research scenario was the first week without treatment and the second until the fifth week of treatment with the CAD learning method in Small and Medium-sized Enterprises (SMEs). There are three SMEs as the research location. The research was divided into eight student groups. The data analysis technique uses descriptive statistics to represent the qualities of creativity and innovation. Combined and partial difference tests were carried out by analyzing variance from the experiment’s class. Learning CAD in SMEs requires preparation in planning, implementation, and evaluation. Conservatively, there is an increase in student creativity and innovation from time to time when they are in SMEs. Students give a good impression of improving their CAD skills with growing confidence and solving industrial product design problems. In addition, the inferential results show differences in student creativity and innovation from time-to-time experiments.

Downloads

Download data is not yet available.

Downloads

Published

2022-07-01

How to Cite

Setiadi, B. R., Sugiyono, & Sukardi, T. (2022). Opening Students’ Creativity and Innovation through CAD Learning in Collaboration with Small and Medium-Sized Enterprises. Journal of Engineering Education Transformations, 129–137. https://doi.org/10.16920/jeet/2022/v36i1/22144

Issue

Volume 36, Issue 1, July 2022

Section

Original Article
Crossref
Scopus
Google Scholar
Europe PMC

References

Asperl, A. (2005). How to teach CAD. Computer-Aided Design and Applications, 2 (1–4), 459–468. https://doi.org/10.1080/16864360.2005.10738395

Burger, N., Chazali, C., Gaduh, A., Rothenber, A. D., Tjandraningsih, I., & Weilant, S. (2015). Reforming policies for small and medium-sized enterprises in Indonesia. RAND Corporation in collaboration with Tim Nasional Percepatan Penanggulangan Kemiskinan (TNP2K). Retrieved from http://www.tnp2k.go.id/images/uploads/downl oads/Reforming SMEs_0529_lowres_2015-1.pdf

Dare-Abel, O., Uwakonye, O., & Opoko, A. (2016). The Effect of CAD on Architecture Students’ Creativity and Enthusiasm. INTED2016 Proceedings, 1(March), 8530–8536. https://doi.org/10.21125/inted.2016.0984

Eves, K., Salmon, J., Olsen, J., & Fagergren, F. (2018). A comparative analysis of computeraided design team performance with collaboration software. Computer-Aided Design and Applications, 15(4), 476–487. https://doi.org/10.1080/16864360.2017.1419649

Galushko, V., & Sagynbekov, K. (2014). Commercialization of University Research in Canada: What Can We Do Better? International Journal of Business Administration, 5(5). https://doi.org/10.5430/ijba.v5n5p1

Goncher, A., Chan, J., & Schunn, C. D. (2017). Measuring design innovation for project-based design assessment: Considerations of robustness and efficiency. Revista Bitácora Urbano Territorial, 27(4), 11–18. https://doi.org/10.15446/bitacora.v27n4Esp.68959

Herr, H., & Nettekoven, Z. M. (2017). The Role of Small and Medium-Sized Enterprises in Development. Nigerian Chapter of Arabian Journal of Business and Management Review. Berlin: Friedrich-Ebert-Stiftung. https://doi.org/10.12816/0040342

Hoffman, N., & Schwartz, R. (2015). Gold Standard: The Swiss Vocational Education and Training System International. Washington, DC: National Center on Education and the Economy.

Kostic, Z., Radakovic, D., Cvetkovic, D., Trajkovic, S., & Jevremovic, A. (2012). Comparative Study of CAD Software, Web3D Technologies, and Existing Solutions to Support Distance-Learning Students of Engineering Profile. International Journal of Computer Science Issues, 9(4), 181–187.

Kumar, V. (2009). A process for practicing design innovation. Journal of Business Strategy, 30(2–3), 91–100. https://doi.org/10.1108/02756660910942517

Morisson, A., & Pattinson, M. (2020). Industry collaboration: a policy brief from the policy learning platform on. Lille.

Poh Kiat Ng, Kian Siong Jee, & Nurul Izah Anuar. (2012). Enhancing Creativity Through Teamwork, Continuous Improvement And CAD: A Review. 3rd International Conference on Engineering and ICT, (April), 68–73.

Prabowo, R., Singgih, M. L., Karningsih, P. D., & Widodo, E. (2020). New product development from inactive problem perspective in Indonesian SMEs to open innovation. Journal of Open Innovation: Technology, Market, and Complexity, 6(1). https://doi.org/10.3390/JOITMC6010020

Robertson, B. F., Walther, J., & Radcliffe, D. F. (2007). Creativity and CAD tools: Lessons for engineering design education from the industry. Journal of Mechanical Design, Transactions of the ASME, 129(7), 753–760. https://doi.org/10.1115/1.2722329

Salaryexplorer. (2021). CAD Drafter Average Salary in Indonesia 2021. Retrieved from www.salaryexplorer.com/salary-survey.php?loc=101&loctype=1&job=90&jobtype=3

Salkind, N. J. (2010). Encyclopedia of research design. Dictionary of Statistics & Methodology. Singapore: SAGE Publications Asia-Pacific Pte. Ltd. https://doi.org/10.4135/9781412983907.n439

Setiadi, B. R., Puspito, J., Sudiyatno, Kurniawan, D., & Kartowagiran, B. (2020). Isn’t it effective if the transformation of product design tests into 3-dimention modelling? Journal of Physics: Conference Series, 1700(1). https://doi.org/10.1088/1742-6596/1700/1/012004

Setiadi, Bayu R., Suparmin, & Samidjo. (2018). Preparing engineering students for entrepreneurial creative industries. Global Journal of Engineering Education, 20(2), 127–131.

Suarta, I. M., Suwintana, I. K., Fajar Pranadi Sudana, I. G. P., & Dessy Hariyanti, N. K. (2018). Employability skills for entry-level workers: A content analysis of job advertisements in Indonesia. Journal of Technical Education and Training, 10(2), 49–61. https://doi.org/10.30880/jtet.2018.10.02.005

Tambunan, T. (2019). Recent evidence of the development of micro, small and medium enterprises in Indonesia. Journal of Global Entrepreneurship Research, 9(1). https://doi.org/10.1186/s40497-018-0140-4

van Rijn, R. A. C., van Esch, P. M. R., Price, R. A., Oonk, M. M. E. M., & Netten, M. P. (2018). U and I: Insights from a University-Industry Design Collaboration. 21st DMI: Academic Design Management Conference Next Wave, (August), 1–2.

Vandeleur, S. (2001). Indicators of creativity in a technology class: a case study. South African Journal of Education, 21(4), 268–272.

Veisz, D., Namouz, E. Z., Joshi, S., & Summers, J. D. (2012). Computer-aided design versus sketching: An exploratory case study. Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM, 26(3), 317–335. https://doi.org/10.1017/S0890060412000170

Wankel, C., & Stoner, J. A. F. (2008). Innovative Approaches to Global Sustainability. New York, NY: Palgrave Macmillan.

Williams, A., Ostwald, M., & Askland, H. H. (2010). Assessing Creativity in the Context of Architectural Design Education. Proceedings of Design Research Society (DRS), (June), 1–9.

Winn, D., & Banks, F. (2012). CAD and Creativity – A New Pedagogy, (2001), 488–495